Spigen Galaxy Z Fold 8 Screen Protector GLAS.tR EZ Fit Pro (2 Pack) - Clear
Guaranteed Safe Checkout
The Spigen Galaxy Z Fold 8 Screen Protector GLAS.tR EZ Fit Pro (2 Pack) protects the phone's rigid outer cover display with 9H tempered glass and a tray-guided installation system. An oleophobic coating helps reduce fingerprints and makes routine cleaning easier, while the EZ Fit Pro tray aligns the glass with the screen before it is pressed into place. Two protectors and the required cleaning materials are included, giving you a second installation or a replacement for later use.
Key Features
- 9H tempered glass adds scratch resistance to the Galaxy Z Fold 8 cover display.
- EZ Fit Pro alignment tray positions the protector without hand-centering loose glass.
- A dust-removal release film helps lift fine particles immediately before adhesion.
- Oleophobic surface treatment reduces visible fingerprints and supports easier cleaning.
- Transparent glass preserves normal cover-screen clarity and touch interaction.
- Two complete protectors are included for a second attempt or future replacement.
Tray-Guided Protection for the Cover Display
This product is for the rigid exterior display only. It must never be installed on the flexible inner folding screen, which uses different materials and service requirements. Work in a clean, low-dust room, switch the phone off, remove the case, and clean the cover display thoroughly. Follow the tray direction shown in the package, press only where instructed, then lift the tray away without sliding the newly applied glass.
If a small bubble remains, gently guide it toward the nearest edge with a wrapped fingertip. A persistent speck under the glass usually indicates trapped dust rather than an adhesion defect. Avoid repeatedly lifting the protector because each lift increases the chance of contamination.
Compatibility
- Designed for: Samsung Galaxy Z Fold 8 standard model cover display only.
- Not compatible: Galaxy Z Fold 8 Ultra, earlier Z Fold generations, Galaxy Z Flip models or the flexible inner display.
- Cases: Designed for case-friendly use, but unusually tight third-party front frames may contact the glass edge.
- Fingerprint reader: Galaxy Z Fold controls outside the cover display remain unobstructed when installed correctly.
- Replacement timing: Replace glass that is cracked, sharply chipped or lifting enough to collect debris.
Package Includes
- 2 × Spigen GLAS.tR EZ Fit Pro tempered-glass protectors
- EZ Fit installation trays and cleaning materials for application
- Phone and case are not included
FAQ
-
Can I install this on the inner folding screen?
No. It is only for the rigid outer cover display. Do not apply tempered glass to the flexible inner panel. -
Why are two protectors included?
The second protector can be used if the first installation is contaminated or saved as a later replacement. -
Should I keep my case on during installation?
No. Remove the case, install the glass with the tray, then refit the case and confirm edge clearance. -
Will it fit Galaxy Z Fold 8 Ultra?
No. Display dimensions differ, so use the exact Ultra version for that phone. -
What if dust is trapped underneath?
Do not repeatedly peel the glass back. If the speck affects use, remove that protector and repeat the full cleaning process with the spare.
| SKU: |
|
|---|---|
| Vendor: | Spigen |
| Type: | Screen Protectors |
| Barcode: |
|
| Compatible Device |
Galaxy Z Fold 8 |
| Color |
Clear |
📦 Order Processing Time
• China warehouse orders are typically processed within 1–2 business days after payment confirmation.
• US warehouse orders may require 2–5 business days processing time.
• Orders placed after 5:00 PM will be processed on the next business day.
• Orders placed on weekends or public holidays will be processed on the following business day.
• If a product is available in multiple warehouses, we reserve the right to adjust the fulfillment location based on stock availability and operational efficiency.
🚚 Shipping Routes & Delivery Time
🇨🇳 China → 🇭🇰 Hong Kong / 🇲🇴 Macau / 🇹🇼 Taiwan
• All shipments are sent via SF Express.
• Cash on Delivery (COD) is not supported.
• Hong Kong & Macau customers may use SF Locker / SF Station (please enter the correct pickup code or full address at checkout).
• Estimated delivery time: 1–2 business days from our Guangzhou warehouse.
• Delivery may be delayed by 1 business day during weekends or public holidays.
🇺🇸 USA → 🇭🇰 Hong Kong
• Orders are shipped via SF Express, USPS, UPS, or other suitable international carriers.
• Processing time: 2–5 business days.
• Estimated delivery time: 7–20 business days depending on customs clearance.
• Import duties, taxes, or clearance fees (if applicable) are the responsibility of the customer.
• Delivery time may be affected by customs inspections or force majeure events.
🇺🇸 USA → 🇺🇸 United States / 🇨🇦 Canada
• Orders are shipped via Amazon, USPS, UPS, or other local carriers.
• Processing time: 2–5 business days.
• Estimated delivery within the United States: 3–7 business days.
• Estimated delivery to Canada: 5–12 business days.
• Canadian orders may be subject to import duties or taxes, which are the responsibility of the customer.
🌍 China → Other International Destinations
• Orders are shipped via postal services or other suitable carriers with tracking provided.
• Estimated delivery time: 7–28 business days depending on destination and customs clearance.
• If a parcel is confirmed lost in transit, we will arrange a replacement or refund.
• If your package is not delivered within 90 days, we provide a full refund guarantee.
⏳ Pre-Order Items
• Pre-order products are not included in the standard processing timeframe.
• Estimated shipping dates will be stated on the product page.
• Orders containing both in-stock and pre-order items may be shipped separately.
📍 Address Accuracy
• Please ensure your shipping address is complete and accurate (including postal code and phone number).
• We are not responsible for delivery issues caused by incorrect or incomplete address information provided at checkout.
📩 Customer Support
[email protected]
Our warehouse is fully stocked with a wide range of authentic Spigen products, organized and managed with strict inventory standards. Every item is stored in its original packaging, neatly categorized on industrial-grade shelving to ensure fast and accurate order processing. From phone cases to screen protectors and accessories, all products are carefully handled and maintained in a clean, spacious environment.
Large-volume shipments arrive directly from Spigen’s factory and are inspected before being placed into storage. Our team works daily to maintain precise stock levels, enabling us to fulfill orders efficiently and ship worldwide with confidence. This is where every order begins—professionally stored, accurately picked, and securely packed before it reaches our customers.
| Order Fulfilled Place | Order Execution Priority | Address |
|---|---|---|
 Guangzhou Warehouse |
Highest Priority | No. 132 Pengjiang Road, Baiyun District, Guangzhou |
 HongKong Warehouse |
Lowest Priority | 56 HOI YUEN ROAD, Kwun Tong, Hong Kong |
 Portland Warehouse |
North American address Higher Priority |
18432 NE SANDY BLVD, PORTLAND, OR, United States |
