ホーム iPad Air Spigen iPad Air 11インチ(M3/M2)/ 10.9インチ(2022/2020)ケース – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro
Spigen iPad Air 11" (M3/M2) / iPad Air 10.9" (2022/2020) – Ultra Hybrid Pro

Spigen iPad Air 11インチ(M3/M2)/ 10.9インチ(2022/2020)ケース – Ultra Hybrid Pro - Black

SKU: ACS02697
販売者: Spigen
バーコード: 8809756645020
セール価格 $44.99 USD
カラー: Black
ウィッシュリストを使用するにはログインしてください

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Spigen Ultra Hybrid Proは、iPad Air 11インチ M3/M2と、2022年または2020年のiPad Air 10.9インチに対応する構造的なフォリオケースです。保護に加えて視聴、タイピング、読書、デスク作業を1つのケースで行いたいAirユーザーに適しています。頑丈なケースほど重くなく、仕事や学習になじむクリーンな外観です。

主な特長

  • 指定されたAir 4機種:11インチM3/M2と、10.9インチの2022/2020年モデルに対応します。
  • 構造的なフォリオ:日常のカバーとAir向けの実用的な前面カバーを組み合わせます。
  • 視聴とタイピング:動画、読書、軽い入力、デスク作業で画面を配置しやすくします。
  • クリーンなハイブリッド設計:重いRugged Armor Proよりすっきりした選択肢です。
  • 5色展開:Black、Sky Blue、Rose gold、Lavender、Teal Blueから選べます。
  • 一体型:基本的な背面ケースとスタンドを別々に用意せず、保護とフォリオ機能をまとめます。

仕事、読書、毎日の持ち運びに

iPad Airを手持ち、デスク、バッグの間で頻繁に動かす方に適しています。書類を読む、レシピを見る、映像を視聴する、入力しやすい角度に置くといった日常の用途を想定した構造です。使用前に対応Airをしっかり装着し、縁と開口部が合っていることをご確認ください。

Ultra Hybrid Proは日常の接触を抑えますが、すべての落下、画面割れ、曲がり、液体接触を防ぐ保証はありません。フォリオを立てるときは安定した面を使い、持ち運ぶ前に閉じてください。iPad、充電機器、その他のアクセサリーは付属しません。

Ultra Hybrid Proと頑丈なケースの違い

視聴や入力を支えるクリーンなフォリオを好むならUltra Hybrid Proを、すっきりした外観より重い頑丈なスタイルを優先するならRugged Armor Proをご検討ください。フォリオ機能が不要ならシンプルな背面ケースも選べます。用途の違いであり、別機種用ケースを交換して使えるという意味ではありません。

対応機種

  • 対応:iPad Air 11インチ M3。
  • 対応:iPad Air 11インチ M2。
  • 対応:2022年または2020年発売のiPad Air 10.9インチ。
  • 非対応:iPad Pro、iPad mini、標準iPad。
  • 購入前の確認:画面サイズだけで選ばず、Airシリーズ、サイズ、世代をご確認ください。

パッケージ内容

  • 選択した色の対応iPad Air用 Spigen Ultra Hybrid Proケース 1個

よくある質問

  • 11インチと10.9インチのAirに使えますか?
    はい。ただし記載したM3、M2、2022年、2020年モデルに限ります。
  • 近いサイズのiPad Proに使えますか?
    いいえ。iPad Proは本体形状が異なり、専用ケースが必要です。
  • フォリオは視聴と入力を支えますか?
    はい。視聴、入力、読書、デスク使用を想定しています。
  • カラーは何色ですか?
    Black、Sky Blue、Rose gold、Lavender、Teal Blueから選べます。
  • 頑丈さを重視したモデルですか?
    いいえ。重い頑丈な方向を求める場合はRugged Armor Proをお選びください。
SKU: ACS02697
販売者: Spigen
タイプ: ケース&カバー
バーコード: 8809756645020
カラー

Black, Sky Blue, Rose gold, Lavender, Teal Blue

Bag/Case Material

Thermoplastic polyurethane (TPU) , Plastic

Case Type

Stand , Folio

Weight

283 g

📦 注文処理時間
• 在庫商品の発送は通常、支払い完了後 1〜2 営業日以内に行われます。
• 午後 5 時以降の注文は翌営業日に処理されます。
• 週末および祝日に行われた注文は、翌営業日に処理されます。
• 追跡情報は発送後 1 時間以内に更新されることが多いです。
• 追跡情報が 12 時間以上更新されない場合はサポートまでご連絡ください。


⏳ 予約商品
• 予約商品は 1〜2 日の発送基準に含まれません。
• 入荷次第すぐに発送いたします。
• 在庫商品と予約商品を同時に購入した場合、分割発送が可能です。


🚚 配送方法と配送時間

🇨🇳 中国本土 / 🇭🇰 香港 / 🇲🇴 マカオ / 🇹🇼 台湾
• すべての注文は SF Express にて発送されます。
• 代金引換(COD)は対応しておりません。
• 香港・マカオのお客様は SF Locker / SF Station の住所を入力できます。
• 広州倉庫から香港・マカオへの配送は通常 1〜2 日です。
• 週末・祝日は 1 日遅延する場合があります。


🌐 国際配送
• 国際発送は郵便小包または適切な配送業者で行われ、追跡番号が提供されます。
• 配送期間は目的地により 10 日〜4 週間程度かかります。
• 天災・戦争・税関検査などの不可抗力により遅延が発生する場合があります。
• 90 日以内に商品が届かない場合、全額返金いたします。


📩 カスタマーサポート
[email protected]

当倉庫は幅広い正規Spigen製品を完全に在庫しており、厳格な在庫基準で整理・管理されています。すべての商品は元のパッケージに入れられ、工業用の棚にきちんと分類されており、迅速かつ正確な注文処理を保証します。スマホケースからスクリーンプロテクター、アクセサリーまで、すべての商品は清潔で広々とした環境で丁寧に取り扱われ、維持されています。

大量の出荷はSpigenの工場から直接到着し、保管前に検査されます。私たちのチームは毎日正確な在庫レベルを維持し、効率的に注文を履行し、世界中へ自信を持って発送できるよう努めています。ここがすべての注文の始まりです—専門的に保管され、正確にピッキングされ、安全に梱包されてお客様のもとへ届けられます。

注文履行場所 注文実行の優先順位 住所
広州倉庫 最高優先度 No. 132 Pengjiang Road, Baiyun District, Guangzhou
香港倉庫 最低優先度 56 HOI YUEN ROAD, Kwun Tong, Hong Kong
ポートランド倉庫 北米の住所
より高い優先度
18432 NE SANDY BLVD, PORTLAND, OR, United States

 

  • 5 stars: 16 (80%)
  • 4 stars: 3 (15%)
  • 3 stars: 1 (5%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
C
Carol Lawler
Good case

Brief content visible, double tap to read full content. Full content visible, double tap to read brief content. It gets stained easily and falls over often but a good case in general Read more Carol Lawler 4 out of 5 starsGood case Reviewed in the United States on April 9, 2026 Size: iPad Air 11 InchColor: Sky Blue Verified Purchase It gets stained easily and falls over often but a good case in general

C
Carol Lawler
Good case

It gets stained easily and falls over often but a good case in general

J
Jose
IPad 10max

Quality is good the stand is an okay. Fits perfectly.

G
Gleb Botov
Good for it’s price

Very good price especially if bought when on sale.

A
Amazon Customer
Good case, poor stand.

Looks good and seems to offer very good protection. My issues is the stand does not do a very good job of keeping it upright when using as intended. The magnet comes loose and the iPad falls flat. If buying to use as a stand I suggest finding another. If just using as a case it seems to function well.

V
Violeta Ruiz
The best product out there!!

Love how its so sturdy and this is my 3rd order for my tablets. I had my phone protected with spigen and dropped it som many times face down sideways and no dents scratches or damages. I had my phone for 5 years and did a trade in like new. So when I bought ipad tablets for the family I was so happy that spigen was available so I bought 3. I would buy again!!

J
Jon
Great case

Item fit the iPad well and it functions well. Cutouts give good access to port and buttons. The volume buttons are covered by the case, but function with little effort.

C
Cliente de Amazon
Great.

Fits perfectly, sturdy, pencil well secured. I had other cases before, and I find this one better protects my iPad, especially its corners.

N
Nat
good bumper case, not too heavy, wish it had a vertical option

it's a good bumper case and value, kind of wish I would've got a case that goes vertical and horizontal. I had one before on my old iPad & otter box , but it was just too big and bulky. This is the right shape and size and weight not too bulky so other not being able to do vertical which I didn't even think about when I bought it my bad.And I figured out how to make a triangular fold using the magnet to help with it make it stay in place took a little while to figure it out where it would stay in place using the magnets It's OK

N
Nat
good bumper case, not too heavy, wish it had a vertical option

it's a good bumper case and value, kind of wish I would've got a case that goes vertical and horizontal. I had one before on my old iPad & otter box , but it was just too big and bulky. This is the right shape and size and weight not too bulky so other not being able to do vertical which I didn't even think about when I bought it my bad. And I figured out how to make a triangular fold using the magnet to help with it make it stay in place took a little while to figure it out where it would stay in place using the magnets It's OK

J
J R McElroy
Great

Great case, just what you expect from speigen

K
Kyle
Slim, Protective, and Perfect Fit for My iPad

This Spigen case fits my iPad Air 11-inch (M3/M2) perfectly. The slim design keeps the tablet lightweight while providing solid protection against bumps and scratches. The cover folds nicely for typing or viewing, and the magnetic attachment works flawlessly with the Apple Pencil.Pros:• Slim and lightweight, doesn’t add bulk• Solid protection against everyday bumps and scratches• Magnetic attachment for Apple Pencil•Folds easily into a stand for typing or viewingCons:• Limited color options• Doesn’t offer heavy-duty drop protectionOverall, this is a great case if you want something protective yet sleek. Perfect for daily use, school, or work.

K
Kyle
Slim, Protective, and Perfect Fit for My iPad

This Spigen case fits my iPad Air 11-inch (M3/M2) perfectly. The slim design keeps the tablet lightweight while providing solid protection against bumps and scratches. The cover folds nicely for typing or viewing, and the magnetic attachment works flawlessly with the Apple Pencil. Pros: • Slim and lightweight, doesn’t add bulk • Solid protection against everyday bumps and scratches • Magnetic attachment for Apple Pencil •Folds easily into a stand for typing or viewing Cons: • Limited color options • Doesn’t offer heavy-duty drop protection Overall, this is a great case if you want something protective yet sleek. Perfect for daily use, school, or work. Read more

J
Jimmie Holmgren
Nöjd kund!

Toppenkvalitet!

S
Saulius Novikovas
Very good quality!

Very good product, does exactly what it says, fits perfectly!

T
The Cult Glitter Co
Love this case!

I was skeptical bc I’m normally not a fan of cases that have a flap to deal with. I’m ADHD and OCD and those things I view as unnecessary and they drive me mad. But this particular one is fantastic and a very smart design. It’s never felt in the way. It magnetizes out of the way in every position. The whole case feels sturdy and very well built. Perfect fit, snaps in nice and snug, affordable protection for an expensive device. Feels good to hold and travel with. The pencil is protected and easy to get in and out. I love this case.

J
J
I love this case, fits the iPad Air M2 (2024, 6th Gen.) perfectly...

I like the design of this case, they made most of the right decisions. 👍 The good: 👍 The case is very slim and lightweight, I wanted the case to be as slim and light as possible for less fatigue. 👍 The case installs very easily because the material is not too rigid, I start by sliding the corner that has all of the buttons into the case first, then pop the other corners in. 👍 The hard materials on the case are a combination of two: the clear back panel is polycarbonate, it looks good but it will likely yellow over time, if this is a problem you may want to get the other Spigen case that has a TPU back. The black parts are a TPU with a matte finish/feel, feels matte like silicone but not grabby and not rubber flexible. I prefer this type of material over silicone because the grabbiness of silicone catches dust and dirt, makes it annoying to slide in and out of a bag or case, and silicone deteriorates over time: it becomes sticky, discolors and stretches. Silicone can also peel off during a fall compared to a rigid case that maintains its form. 👍 All sides are covered by the TPU, even the pencil "slot". I haven't tested pencil charging because I don't use the Apple Pencil, I also didn't want the weight of an enclosed/dedicated pencil slot (which this case does not have). I've looked at a lot of folio cases, most leave the TPU material off of the pencil slot or leave the TPU off the side of the iPad inboard where the folio flap hinge is, on this case though all sides are covered for maximum protection. I just don't like leaving sides exposed where dust or dirt can scratch the sides of the iPad. 👍 The cut outs for the speaker grills are nice and conservative, with trusses to add rigidity, if they made the cut out one long hole without trusses it would make the TPU on the rim of the hole easy to pull and tear off. 👍 The cut out for the TouchID button/sensor is absolutely spot on, the cut out has beveled edges on all sides so your finger can access the entire sensor, the gap between the sensor and the beveled edges are also equal on all sides, a perfect fit. It fits so well and is so much more comfortable than my last case that I deleted all of my fingerprints in iPadOS and recreated them with this new case for higher accuracy. 👍 The corners of the case have a nice shape even with the extra "air cushion" padding, other cases make them very ugly protruding outward in a way that looks like a hatchet head. The padding on the corners for this case protrude on two axes: they protrude laterally for falls that land directly on the corner, but they also protrude toward the back, so that if it drops onto its back (or you lay it flat on a surface), the clear polycarbonate back is not touching the surface. 👍 The magnetic locking tab for the folio cover can fold over and magnetically lock onto the inside of the folio cover, it's a weak magnetic lock but if you don't touch it or flap the folio cover aggressively it will hold, this way it has somewhere to stay when the folio cover is open and isn't hanging in the wind. 👍 If you're worried the case you ordered will be someone else's used return, it comes in a box that is taped on all sides, you will notice if it's been tampered with. 🤔 The meh: 🤔 The magnetic locking tab for the folio cover is a little hard to peel off the back of the case when you're trying to open the folio cover, there's almost no grip, you either have to slide your fingernail under it and pry, or pull on the loop that the pencil is supposed to be in. If you don't have a pencil in the loop, the loop also sticks out a little awkwardly. 🤔 The volume buttons are covered but have tiny slits above and below each button which I dislike, slits allow dust and dirt in and the material seems plenty flexible enough to do without them. 🤔 The border of material around the perimeter of the screen sticks out quite a ways toward the center of the screen, this gives you added protection on the edges and makes it unlikely for the iPad to pop out. I did notice the corner where the power and volume buttons are, juts toward the center just slightly more (barely perceptible), maybe because they had to alter the mold there for the buttons, the jutting out will apply pressure on a screen protector if you have one and it will start to lift here. I use a tempered glass screen protector so I could see the air bubble forming, I pressed it back down and pushed the corner away a bit and it seems to have stopped and hasn't lifted since. I'm not sure why it hasn't lifted since, my theory is that when an iPad is actually in the case it stretches the case corners outward and over time it stretches out enough that it no longer pushes on the screen protector. If you have a screen protector that's not centered properly this might cause you problems, Spigen advertises that it works with their screen protector so I guess they cut their screen protectors slightly smaller or something. 🤔 The front of the folio cover feels like a matte TPU just l...

J
J
I love this case, fits the iPad Air M2 (2024, 6th Gen.) perfectly...

I like the design of this case, they made most of the right decisions.👍 The good:👍 The case is very slim and lightweight, I wanted the case to be as slim and light as possible for less fatigue.👍 The case installs very easily because the material is not too rigid, I start by sliding the corner that has all of the buttons into the case first, then pop the other corners in.👍 The hard materials on the case are a combination of two: the clear back panel is polycarbonate, it looks good but it will likely yellow over time, if this is a problem you may want to get the other Spigen case that has a TPU back. The black parts are a TPU with a matte finish/feel, feels matte like silicone but not grabby and not rubber flexible. I prefer this type of material over silicone because the grabbiness of silicone catches dust and dirt, makes it annoying to slide in and out of a bag or case, and silicone deteriorates over time: it becomes sticky, discolors and stretches. Silicone can also peel off during a fall compared to a rigid case that maintains its form.👍 All sides are covered by the TPU, even the pencil "slot". I haven't tested pencil charging because I don't use the Apple Pencil, I also didn't want the weight of an enclosed/dedicated pencil slot (which this case does not have). I've looked at a lot of folio cases, most leave the TPU material off of the pencil slot or leave the TPU off the side of the iPad inboard where the folio flap hinge is, on this case though all sides are covered for maximum protection. I just don't like leaving sides exposed where dust or dirt can scratch the sides of the iPad.👍 The cut outs for the speaker grills are nice and conservative, with trusses to add rigidity, if they made the cut out one long hole without trusses it would make the TPU on the rim of the hole easy to pull and tear off.👍 The cut out for the TouchID button/sensor is absolutely spot on, the cut out has beveled edges on all sides so your finger can access the entire sensor, the gap between the sensor and the beveled edges are also equal on all sides, a perfect fit. It fits so well and is so much more comfortable than my last case that I deleted all of my fingerprints in iPadOS and recreated them with this new case for higher accuracy.👍 The corners of the case have a nice shape even with the extra "air cushion" padding, other cases make them very ugly protruding outward in a way that looks like a hatchet head. The padding on the corners for this case protrude on two axes: they protrude laterally for falls that land directly on the corner, but they also protrude toward the back, so that if it drops onto its back (or you lay it flat on a surface), the clear polycarbonate back is not touching the surface.👍 The magnetic locking tab for the folio cover can fold over and magnetically lock onto the inside of the folio cover, it's a weak magnetic lock but if you don't touch it or flap the folio cover aggressively it will hold, this way it has somewhere to stay when the folio cover is open and isn't hanging in the wind.👍 If you're worried the case you ordered will be someone else's used return, it comes in a box that is taped on all sides, you will notice if it's been tampered with.🤔 The meh:🤔 The magnetic locking tab for the folio cover is a little hard to peel off the back of the case when you're trying to open the folio cover, there's almost no grip, you either have to slide your fingernail under it and pry, or pull on the loop that the pencil is supposed to be in. If you don't have a pencil in the loop, the loop also sticks out a little awkwardly.🤔 The volume buttons are covered but have tiny slits above and below each button which I dislike, slits allow dust and dirt in and the material seems plenty flexible enough to do without them.🤔 The border of material around the perimeter of the screen sticks out quite a ways toward the center of the screen, this gives you added protection on the edges and makes it unlikely for the iPad to pop out. I did notice the corner where the power and volume buttons are, juts toward the center just slightly more (barely perceptible), maybe because they had to alter the mold there for the buttons, the jutting out will apply pressure on a screen protector if you have one and it will start to lift here. I use a tempered glass screen protector so I could see the air bubble forming, I pressed it back down and pushed the corner away a bit and it seems to have stopped and hasn't lifted since. I'm not sure why it hasn't lifted since, my theory is that when an iPad is actually in the case it stretches the case corners outward and over time it stretches out enough that it no longer pushes on the screen protector. If you have a screen protector that's not centered properly this might cause you problems, Spigen advertises that it works with their screen protector so I guess they cut their screen protectors slightly smaller or something.🤔 The front of the folio cover feels like a matte TPU just like the rest of...

m
mark Brewster
Very good product

Excellent quality

C
CanadianBuyersRepresent
Just excellent.

Perfect form factor, snug fit, looks elegant. Only thing is, the front part when it folds to become a kickstand isn't super sturdy - but beside that it is a great buy.