Spigen 手機殼用磁吸環貼片 – OneTap (MagFit) - Black

I purchased this Spigen MagFit adapter to add MagSafe compatibility to my Pixel 8 Pro, but it has been an utterly disappointing experience. The included alignment tool is fundamentally flawed and does not line up properly with the wireless charging coil placement. As a result, the ring is misaligned, causing wireless charging to never initiate or increase the battery percentage at all. This renders the entire product useless for its advertised purpose of enabling MagSafe functionality on non-MagSafe devices like the Pixel series. Once you apply the adhesive ring incorrectly due to the flawed alignment guide, there is no way to reposition or remove it without damaging the case. What's even more infuriating is Spigen's dismissive customer service response. Instead of acknowledging the alignment issue with their product, they simply stated they "cannot guarantee it would work since the charger belongs to a competitor." This is an unacceptable attempt to shift blame and a failure to stand behind the promised compatibility of their MagFit adapter. Spigen needs to take responsibility, investigate this widespread alignment problem thoroughly, and provide an actual solution - either by redesigning the adapter and alignment tool specifically for the charging coil placement or offering full refunds to affected customers. Dismissing this as a mere limitation due to using a third-party charger is a disservice to paying customers who purchased the adapter under the premise of adding MagSafe capabilities to their phones. I strongly caution against buying this adapter until Spigen acknowledges and rectifies the alignment and compatibility problems. As it stands, the MagFit adapter fails to deliver on its promised functionality for our devices, and Spigen's response has been completely unsatisfactory. Read more

Strong magnet. Strong adhesive. Works great. Nuff said.

No merece la pena en absoluto; funciona bien y cero quejas, pero hay alternativas mucho más baratas que son prácticamente iguales.

Grabbed one of these to use with a MagSafe compatible wallet and I was concerned that there were notices that it would not work on textured cases. I have a Motorola branded case for my Moto G Power 2026 phone and it has a fine texture on the back. I applied it according to the directions and was able to place it perfectly. I have been using it for 3 months or so and I have not had a problem yet. It works with all the MagSafe compatible accessories I've come across including my car mount. I must say I am extremely impressed with this product and I would recommend it to anyone looking for a way to use all the nice MagSafe accessories available to iPhone users. I can't guarantee that this will work with every textured phone case, but for mine it works perfectly. Also as a side note wireless charging does not work with this on my case because with the case and the plate attached it has too much distance from the charging surface.

I love these. I keep buying them every time I get a new phone or case. I've bought several for others so they can use my phone chargers and stuff. I think I'm going to buy a couple just to keep 'in stock' in case they go away or something. It's easy to apply them, the adhesive is strong enough that it's never separated, and the magnets are strong enough to easily hold up even the chunkiest of phones (my original Pixel Fold brick) while attached sideways in a bumpy car. Lined up correctly, it allows for wireless charging and NFC too, depending on your phone's support... check where your wireless charging "center" is before applying it to ensure it doesn't interfere. I tried some cheaper ones first, but usually the adhesive fails after not too many attachment/removal cycles. This one has the added bonus of having the 'alignment' prong, too, which is really nice for car mounts!

Easy to install and works great if your case doesn’t have included on the design, a bit expensive but is worth every penny. Durable and high quality!

Very strong adhesion and works perfectly with magsafe accessories. The alignment tool is also very nice.

First, I love Spigen products. I've been using their cases exclusively for years. This ring works very well -- strong magnetic connection. The slight protrusion from the back of the case isn't noticeable when other accessories are attached, and it can be

Just the ticket for adding Magsafe capability to your Android phone. I used this on my Pixel 8 Pro and it works great. The package has minimal directions so you need to be careful when installing it because placement of the ring is critical. However, the included plastic backer that the ring is attached to has vertical and horizontal lines inscribed on it. Line up the backer so the same number of lines show above/below and on each side and the ring will be located correctly. Do this without peeling away the plastic covering the adhesive surface first so you have a good idea where you're going to place it. The adhesive is a quick grab so you don't have a lot of wiggle room if you get it wrong. Once placed on the phone case, rub the ring well with pressure. The adhesive is pressure activated and if you don't press very firmly it won't reach maximum strength and may give out when removing the phone from a magnetic dock. Let the adhesive cure for 24 hours before using a Magsafe charger or accessory. (Similar to 3M UHB tape.) My phone case has a lightly textured surface and I've had no issues. The ring shows no signs of detaching or peeling off and is super strong.

Installs easy, the magnet is strong. It's also stylish and adds a touch of style to my case, Spigen Sony Xperia edition. Spigen is a no brainer. Just works and lasts.

I’ve had this for over 6 months now, and it’s been a work horse. The Installation was incredibly easy, and I simply stuck it on the outside of my phone case, which isn’t MagSafe-compatible. Since then, I’ve been able to use it with my MagSafe wallet and easily swap it onto my dashboard for convenient hands-free use. The magnet holds really well and allows me to easily take my wallet on and off without any issues. The only time it doesn’t hold as securely is when the phone is dropped—the wallet tends to separate easily. The magnet isn’t the strongest, but it’s more than enough to keep my wallet in place during normal use. Overall, it’s been a reliable and effective solution for MagSafe compatibility!

Gemakkelijk aan te brengen, sterke magneet.

A high quality product, as always from Spigen. The magnetic force on this is stronger than the iPhone 15 Pro. Works well with all my MagSafe accessories now. The only hitch is the installation procedure for Pixel phones. If you follow the stencil to affix this ring, you may actually be offset to the actual wireless coil location on the phone, resulting in poor or NO wireless charging using MagSafe chargers. Recommend using teardown pics of your exact phone model to know where the coils are positioned and then stick the ring using the stencil. For my Pixel 7, I found that the coils are actually a few mm below the "G" logo. Also note that this ring works best when sticking it on on the phone directly or any of the advertised cases. It may not last on textured or other silicone cases. Use Spigen's suggested cases to be safe.

The Spigen Metal Ring Plate (MagFit) Compatible with MagSafe in Black is a product designed to enhance the functionality of your MagSafe-compatible device. To assess its value for money and best features, let's break down its key aspects: Compatibility: The Spigen Metal Ring Plate is explicitly designed to work with MagSafe, ensuring a perfect fit for your Apple devices. This compatibility ensures that it will work seamlessly with your iPhone or other MagSafe-compatible devices. Quality and Build: The product is made from metal, which not only adds a premium feel but also ensures durability. The black color adds a sleek look that complements your device's aesthetics. Easy Installation: One of its primary features is the ease of installation. You can attach it to your device or its case with little effort. The adhesive ensures a secure attachment without leaving any residue upon removal. Magnetic Strength: The metal ring plate enhances the magnetic connection between your device and MagSafe accessories. It ensures a strong and stable connection, preventing accidental detachment, which can be a common issue with some other non-MagSafe accessories. Functionality: It serves as a handy addition for various purposes. You can use it with MagSafe-compatible wireless chargers, wallets, and other accessories. This adds value to your device by expanding its functionality. Value for Money: The value for money largely depends on your usage and needs. If you frequently use MagSafe accessories or need a stable and reliable connection, this product offers a cost-effective solution to enhance your device's capabilities. Durability: The metal construction of the ring plate ensures longevity. It is resistant to wear and tear, making it a good investment for the long term. Design: The sleek black design complements the aesthetics of your device without being obtrusive. Customer Reviews: To get a better idea of its value, it's

The magnets work great. Not the strongest I've used, (Rokform) but really it's the perfect amount. I have an S23 and you can get it to stay on some metal objects. It snaps into position very well and actually holds on accessories and mounts. I love the look and feel of it. I did have problems with the installation. It's not very clear where to put the ring. I assume the very center, but on my S23 that's not even possible because of the camera lenses. I used a metric tape measure and just got it as close as possible to one of my cases that came with a MagSafe ring built in. It's probably because I used a textured case, and it recommends you don't use a textured case, but I had a hard time getting it to come off the installation plate. It could also be that the camera protruding keeps it from laying flush with the case. Once I got it on, it was holding very well with no issues. It would be nice if they told you the numbers to line it up on for each phone. Although using a USB insert with an alignment works better, it keeps the product from being up-to-date. I think Spigen's alignment tool is a happy medium. It wirelessly fast charges on my Anker charger. I haven't had it long enough to see if it gets hot, but it has on all my MagSafe cases, so I don't think that's a good way to gauge the alignment. Update: I've bought this multiple times for multiple cases. The first ones I bought the magnets were not as strong as the ones I bought later on. It's not a huge difference, but I can put the ones with the newer magnetic rings on my fridge and it doesn't slide down at all. Only the first two I bought slide down. Read more