首頁 Google Pixel 10 Pro Fold Spigen Pixel 10 Pro Fold 鏡頭保護貼 – Optik EZ Fit(2 入)
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack)
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 2
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 3
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 4
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 5
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 6
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 7
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack)
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 2
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 3
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 4
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 5
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 6
Spigen Pixel 10 Pro Fold Lens Protector Optik EZ Fit (2 Pack) view 7

Spigen Pixel 10 Pro Fold 鏡頭保護貼 – Optik EZ Fit(2 入)

SKU: AGL09664
供應商: Spigen
條碼: 8800283307252
售價 $30.99 USD
Compatible device: Google Pixel 10 Pro Fold
Color: Crystal Clear
登入以使用願望清單

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Spigen Optik EZ Fit 是專為 Google Pixel 10 Pro Fold 打造的 Crystal Clear 相機鏡頭保護貼,一組包含兩片。它在後置相機玻璃上增加強化防護;EZ Fit 安裝輔助可引導對位,第二片則可作為備品。

主要特色

  • 精準貼合 Pixel 10 Pro Fold 相機:依折疊機後置相機配置成型。
  • 兩片鏡頭防護:內含兩片,供首次使用與備用或更換。
  • EZ Fit 對位輔助:引導式放置可減少安裝時的猜測。
  • Crystal Clear 強化層:有助於減少相機玻璃周圍的刮痕、磨損與直接接觸。
  • 搭配相容保護殼:可補充相容手機殼的防護,但不能取代整機保護。
  • 專為相機防護:本產品不是外側封面螢幕或內側螢幕保護貼。

Pixel 10 Pro Fold 的專屬後置相機防護

若 Pixel 10 Pro Fold 後置相機玻璃需要專用防護層,且偏好引導式放置,可選 Optik EZ Fit。兩片裝提供第二片,供日後更換、備用或再次嘗試安裝。

請先取下保護殼,洗淨並擦乾雙手,再於光線充足、灰塵較少的環境清潔後置相機區域。從不同角度檢查表面,依照對位指示操作;重新裝回保護殼前,請確認相機畫面與保護貼邊緣。

備用保護貼應留在包裝內,遠離灰塵與壓力。請使用在相機周圍保留足夠間距、不會擠壓或掀起已安裝玻璃的相容保護殼。若保護貼出現缺角、裂痕或鬆動,請予以更換。

強化鏡頭防護有助於減少日常刮痕與接觸,但無法保證相機玻璃承受每次摔落、直接撞擊或擠壓。它不會讓手機具備防水能力,也不保護外側或內側螢幕。

相容性

  • 相容裝置:僅適用 Google Pixel 10 Pro Fold 後置相機。
  • 不相容:Pixel 10、Pixel 10 Pro、Pixel 10 Pro XL、Pixel 10a 或較早的 Fold 機型。
  • 防護範圍:後置相機鏡頭玻璃;螢幕防護需另購。
  • 顏色:Crystal Clear。
  • 購買確認:請確認 Pixel 10 Pro Fold 及相容保護殼的相機間距。

包裝內容

  • Google Pixel 10 Pro Fold 專用 Spigen Optik EZ Fit 相機鏡頭保護貼 × 2

常見問題

  • 這是螢幕保護貼嗎?
    不是,它保護後置相機鏡頭區域。
  • 內含幾片鏡頭保護貼?
    包裝內含兩片 Crystal Clear 保護貼。
  • 適用 Pixel 10 Pro XL 嗎?
    不適用,本產品專為 Pixel 10 Pro Fold 打造。
  • 可以搭配保護殼嗎?
    可以,但保護殼必須保留足夠間距。
  • 能避免所有相機玻璃破裂嗎?
    不能,它可增加防護,但無法阻擋所有撞擊。
SKU: AGL09664
供應商: Spigen
類型: 鏡頭保護貼
條碼: 8800283307252
Compatible device

Google Pixel 10 Pro Fold

Color

Crystal Clear

Weight

50 g

📦 訂單處理時間

• 中國倉庫訂單通常於付款確認後 1–2 個工作天內完成處理並寄出。
• 美國倉庫訂單處理時間約為 2–5 個工作天。
• 下午 5:00 後下單將於下一個工作天處理。
• 週末或公眾假期下單將於下一個工作天處理。
• 若商品同時於多個倉庫有現貨,我們保留依庫存狀況與營運安排調整履約倉庫之權利。


🚚 配送路線與預計時間

SF Express 順豐速運 (🇨🇳 中國 → 🇭🇰 香港 / 🇲🇴 澳門 / 🇹🇼 台灣)

廣州倉庫發往香港、澳門及台灣的部分商品可享順豐免運費;以結帳時顯示為準
• 全部訂單採用 順豐速運 SF Express。
• 不支援貨到付款(COD)。
• 香港及澳門客戶可使用 順豐智能櫃 / 順豐站(請於結帳時正確填寫完整取件資料)。
• 廣州倉庫發往港澳一般約 1–2 個工作天送達。
• 週末或公眾假期可能延遲 1 個工作天。


Standard International 標準國際 (美國 / 日本→ 香港 / 台灣)

10美元,大概79港幣
• 透過 SF Express、USPS、UPS 或其他適合之國際物流商寄送。
• 處理時間約 2–5 個工作天。
• 預計運送時間約 7–20 個工作天(視清關狀況而定)。
• 如產生進口關稅、稅金或清關費用,須由收件人自行負擔。
• 運送時間可能因海關查驗或不可抗力因素而延遲。


🇺🇸 美國 → 🇺🇸 美國 / 🇨🇦 加拿大
• 透過 Amazon、USPS、UPS 或其他當地物流商配送。
• 處理時間約 2–5 個工作天。
• 美國境內配送約 3–7 個工作天。
• 加拿大配送約 5–12 個工作天。
• 加拿大訂單可能產生進口稅或相關費用,由買家自行承擔。


🌍 中國 → 其他國際地區
• 透過郵政或其他適合之物流商寄送,並提供追蹤號碼。
• 預計送達時間約 7–28 個工作天(視目的地與清關情況而定)。
• 若包裹確認於運送途中遺失,我們將安排補寄或退款。
• 若超過 90 天未送達,提供全額退款保障。


⏳ 預購商品
• 預購商品不適用於一般處理時效。
• 預計出貨時間將標示於商品頁面。
• 同時包含現貨與預購商品之訂單,可能分開出貨。


📍 地址正確性
• 請確保填寫完整且正確的收件地址(包含郵遞區號與聯絡電話)。
• 因地址填寫錯誤或不完整所導致之配送失敗,本店恕不負責。


📩 客服信箱
[email protected]

我們的倉庫備有各式正品Spigen產品,依嚴格庫存標準組織管理。每件商品均存放於原包裝中,整齊分類於工業級貨架上,確保快速且準確的訂單處理。從手機殼到屏幕保護貼及配件,所有產品均在乾淨寬敞的環境中細心處理與維護。

大量貨物直接從Spigen工廠抵達,經過檢查後存入倉庫。我們的團隊每日維持精確的庫存水平,使我們能有效履行訂單並自信地全球發貨。每筆訂單都從這裡開始——專業存放、精確揀選,並安全包裝後送達客戶手中。

訂單履行地點 訂單執行優先權 地址
廣州倉庫 最高優先權 廣州市白雲區蓬江路132號
香港倉庫 最低優先權 觀塘開源道56號,香港
波特蘭倉庫 北美地址
較高優先權
18432 NE SANDY BLVD, PORTLAND, OR, 美國

 

  • 5 stars: 1 (50%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (50%)
K
Kaushik Singh
Much needed protection, easy to install and anti fingerprint

A well designed screen protector and a much needed one. These days camera bumps are big, and easily get scratches when used on tables, cars etc. This provides much needed protection from scratches and cracks. It's not much thick, still stays inside the spigen back cover of mine. Installation system is very nice, didn't get a single bubble while installing. Fits perfectly, has a whole for the back mic as well. Good thing is It covers only the glass part, not like some others who cover till the flash light, which makes them looks bad. Comes with everything required to install inside the package. There are 2 quantities, great for backup.

D
DG
Slight haze will 100% dull your photos.

The quick detail, there is a haze. Either on the lens or from the adhesive. I thought maybe it would go away after a day, but it has not. I tried to get a close up to show what I am seeing. This is not from the peel off layer, but it's on/inside the lens cover itself. Most people might never notice, but I get bothered by things like this. The install was super easy and it appears to be will made. I think that's the other part that bugs me. Why try to get everything else right but the clarity? Ok, it drove me nuts and I removed it. Your basically giving you phone cataracts with this lens protector.