Spigen Galaxy Watch Ultra 2 47mm Bezel Ring - Bezel Tune - Silver
Guaranteed Safe Checkout
The Spigen Galaxy Watch Ultra 2 47mm Bezel Ring - Bezel Tune is an adhesive stainless-steel ring that changes the outer bezel appearance and adds a sacrificial metal layer around a common contact area. It is built around the exact 47mm Ultra fit rather than a generic smartwatch shape, so the controls, rear sensors and attachment points remain part of the buying decision. The product is intended for everyday protection, comfort or styling as described below; it does not include the watch or charger.
Key Features
- Stainless-steel construction adds: Stainless-steel construction adds a defined metal accent around the bezel.
- Pre-applied adhesive supports: Pre-applied adhesive supports a direct ring installation.
- Extra tape and: Extra tape and a removal tool are included for maintenance.
- Black and Silver: Black and Silver variants let the bezel coordinate with different bands and watch finishes.
- Exact compatibility: The option selector clearly separates the supported Galaxy Watch Ultra generation and color.
- Purpose-specific package: The included components match this product type without implying unrelated accessories.
How This Accessory Fits Your Setup
Choose Bezel Tune for a ring-only change that leaves most of the watch body exposed. Bezel Tune Pro adds a surrounding hybrid case for broader coverage.
This accessory suits owners who want a model-specific Spigen option and prefer clear compatibility over a universal fit. It can be used for commuting, work, travel and suitable daily activity, but no case, glass or band can prevent every scratch, break, release or impact. Inspect the accessory regularly and replace it if the material, adhesive, buckle, links or attachment points become damaged.
Before installation, clean and dry the watch and the accessory. Work over a stable surface, align every control and connector, and avoid forcing parts into position. After workouts, swimming or dusty activity, remove the accessory when practical, clean away moisture, salt and grit, and let every surface dry fully before reassembly. Follow Samsung's watch care guidance and Spigen's supplied fitting instructions.
Compatibility
- Designed for: Samsung Galaxy Watch Ultra 2 47mm.
- Not compatible with: the original Galaxy Watch Ultra, smaller Galaxy Watch models or any watch with a different body shape.
- Health sensors: Rear sensors need clean, direct wrist contact; readings also depend on band tension, skin condition and watch settings.
- Charging: Confirm the watch sits correctly on its charger after installation, because alignment can vary with accessory thickness and charger design.
Installation and Care
Check the selected Compatible Device and Color before opening the package. Fit the accessory slowly and verify that buttons, microphones, speakers, sensors and charging contact remain unobstructed. Do not use sharp tools against the watch. Wipe routine dirt with a soft damp cloth, avoid harsh solvents, and allow the product to dry before wearing or charging. Adhesive parts should be installed once the contact area is clean and should not be repeatedly lifted and reused.
Package Includes
- 1 Spigen Bezel Tune bezel ring
- Galaxy Watch, charger and any accessory not named above are not included
FAQ
-
Which watch does this accessory fit?
Choose the listed option for Samsung Galaxy Watch Ultra 2 47mm; it is not a universal smartwatch accessory. -
Does the package include a Galaxy Watch?
No. The package contains only the Spigen accessory and the specifically listed installation components. -
Can I use it with another case or screen protector?
Compatibility depends on edge clearance and construction. Do not stack parts that lift, press against or prevent correct seating. -
Will health tracking and charging still work?
The design keeps the relevant areas accessible, but results depend on correct installation, clean sensor contact and charger alignment. -
Who should choose this product?
Choose it when the described Bezel Tune construction and exact 47mm compatibility match your preferred protection, comfort or styling setup.
| SKU: |
|
|---|---|
| Vendedor: | Spigen |
| Tipo: | Bezel Ring |
| Código de barras: |
|
| Compatible Device |
Samsung Galaxy Watch Ultra 2 (47mm) |
| Color |
Silver, Black |
📦 Procesamiento de pedidos
• Los productos en stock se envían normalmente dentro de 1–2 días laborables después del pago.
• Los pedidos realizados después de las 5:00 PM se procesarán el siguiente día laborable.
• Los pedidos de fines de semana o festivos se procesarán el siguiente día laborable.
• La información de seguimiento suele actualizarse dentro de 1 hora tras el envío.
• Si no se actualiza en 12 horas, contacta con nuestro soporte.
⏳ Productos en preventa
• Los productos en preventa no están sujetos al plazo de envío de 1–2 días.
• Serán enviados tan pronto como llegue nuevo stock.
• Si tu pedido contiene artículos en stock y de preventa, podemos hacer envíos separados.
🚚 Métodos de envío y entrega
🇨🇳 China continental / 🇭🇰 Hong Kong / 🇲🇴 Macao / 🇹🇼 Taiwán
• Todos los pedidos se envían mediante SF Express.
• No se admite pago contra entrega (COD).
• Hong Kong y Macao pueden usar SF Locker / SF Station.
• Envío desde Guangzhou suele tardar 1–2 días.
• Puede retrasarse 1 día en fines de semana o festivos.
🌐 Envíos internacionales
• Los pedidos internacionales se envían por correo postal o transportistas adecuados con número de seguimiento.
• Tiempo estimado: 10 días – 4 semanas.
• Retrasos posibles por causas de fuerza mayor (clima, guerra, aduanas).
• Si no recibes tu paquete en 90 días, ofrecemos reembolso completo.
📩 Soporte al cliente
[email protected]
Nuestro almacén está completamente abastecido con una amplia gama de productos auténticos de Spigen, organizados y gestionados con estrictos estándares de inventario. Cada artículo se almacena en su embalaje original, cuidadosamente categorizado en estanterías industriales para garantizar un procesamiento rápido y preciso de los pedidos. Desde fundas para teléfonos hasta protectores de pantalla y accesorios, todos los productos se manejan y mantienen con cuidado en un ambiente limpio y espacioso.

Los envíos de gran volumen llegan directamente de la fábrica de Spigen y se inspeccionan antes de ser almacenados. Nuestro equipo trabaja diariamente para mantener niveles de stock precisos, lo que nos permite cumplir con los pedidos de manera eficiente y enviar a todo el mundo con confianza. Aquí es donde comienza cada pedido: almacenado profesionalmente, recogido con precisión y empaquetado de forma segura antes de llegar a nuestros clientes.
| Lugar de cumplimiento del pedido | Prioridad de ejecución de pedidos | Dirección |
|---|---|---|
|
|
Prioridad más alta | No. 132 Pengjiang Road, Distrito Baiyun, Guangzhou |
|
|
Prioridad más baja | 56 HOI YUEN ROAD, Kwun Tong, Hong Kong |
|
|
Dirección de América del Norte Prioridad más alta |
18432 NE SANDY BLVD, PORTLAND, OR, Estados Unidos |






















