Spigen WeatherBloc Tesla Model Y 2020-2024 Floor Mat Set
Guaranteed Safe Checkout
Protect the first- and second-row footwells of a compatible 2020–2024 Tesla Model Y with the Spigen WeatherBloc floor mat set. The vehicle-specific mats use raised edges, water-resistant synthetic rubber-based construction, and a skid-resistant underside to help contain rain, snow, mud, sand, and everyday dirt. This set does not fit the redesigned 2025/2026 Model Y Juniper cabin.
Key Features
- Model Y 2020–2024 fit: shaped for the pre-Juniper first- and second-row cabin floor.
- WeatherBloc containment: raised edges help keep liquid, mud, sand, and debris on the mat rather than the carpet.
- EdgeGuard coverage: extends protection along the side area near the center console.
- SlipLock underside: uses a skid-resistant bottom pattern to support stable placement.
- Water-resistant material: synthetic rubber-based construction supports wet-weather use and routine cleaning.
- Easy maintenance: wipe, vacuum, or remove and hose down the mats before drying them fully.
All-weather coverage for the pre-Juniper cabin
This floor mat set is best for owners of a 2020, 2021, 2022, 2023, or 2024 Model Y who want tailored front- and rear-row coverage rather than universal trim-to-fit mats. The raised perimeter helps manage tracked-in water and grit, while the shaped edges follow the compatible footwell. Use the mats only in the intended seating row and orientation.
Before driving, remove old loose mats, clean the carpet, place each piece flat, and confirm that the driver's mat does not overlap pedals or interfere with accelerator and brake travel. Do not stack these mats over another floor mat. Press the pieces into their intended contours and inspect the fit after seat adjustments, cleaning, or heavy cargo movement.
For cleaning, remove the mats from the vehicle. Vacuum dry debris, wipe the surface, or rinse with water. Let every piece dry completely before reinstalling it. Avoid harsh chemicals, open flame, and driving with a curled, damaged, or unsecured mat. Water-resistant construction helps contain ordinary spills but does not make the vehicle interior waterproof.
Compatibility
Compatible only with Tesla Model Y model years 2020 through 2024 using the pre-Juniper cabin floor geometry. It is not compatible with Model Y Juniper 2025/2026, Model 3, Model X, Model S, Cybertruck, or other vehicles. Confirm model year and cabin generation before purchase; registration year alone may not identify a transition-period vehicle correctly.
Package Includes
- 1 × first-row floor mat set
- 1 × second-row floor mat section
- Color: Black
- Cargo, trunk, and frunk mats are not included unless separately stated
FAQ
-
Who is this floor mat set best for?
It suits owners of a pre-Juniper 2020–2024 Model Y who need fitted first- and second-row all-weather coverage. -
Will it fit a 2025 or 2026 Model Y Juniper?
No. The Juniper floor geometry is different and requires a generation-specific mat set. -
Can I place it over factory carpet mats?
No. Remove loose existing mats and install each WeatherBloc piece directly in the intended footwell. -
Does the set include a cargo mat?
No cargo, trunk, or frunk mat is included in the reviewed first- and second-row package. -
How should the mats be cleaned?
Remove them, vacuum or rinse as needed, and let them dry completely before reinstalling them securely.
📦 Обработка заказов
• Товары в наличии обычно отправляются в течение 1–2 рабочих дней после оплаты.
• Заказы, оформленные после 17:00, обрабатываются на следующий рабочий день.
• Заказы, сделанные в выходные или праздничные дни, обрабатываются в первый рабочий день после них.
• Информация по отслеживанию обычно обновляется в течение 1 часа после отправки.
• Если обновления нет более 12 часов, свяжитесь с поддержкой.
⏳ Предзаказ
• Товары по предзаказу не подпадают под правило отправки в течение 1–2 дней.
• Будут отправлены сразу после поступления на склад.
• Если заказ содержит товары в наличии + по предзаказу, возможна раздельная отправка.
🚚 Способы доставки и сроки
🇨🇳 Китай / 🇭🇰 Гонконг / 🇲🇴 Макао / 🇹🇼 Тайвань
• Все отправления выполняются через SF Express.
• Оплата при получении (COD) недоступна.
• В Гонконге и Макао можно использовать SF Locker / SF Station.
• Доставка из Гуанчжоу занимает обычно 1–2 дня.
• Возможна задержка на 1 день в выходные и праздники.
🌐 Международная доставка
• Международные отправления осуществляются почтовыми службами или курьерами с номером отслеживания.
• Срок доставки: 10 дней – 4 недели, в зависимости от страны.
• Возможны задержки из-за форс-мажора (погода, война, таможня).
• Если посылка не доставлена в течение 90 дней, мы предоставляем полный возврат средств.
📩 Служба поддержки
[email protected]
Наш склад полностью укомплектован широким ассортиментом оригинальной продукции Spigen, организован и управляется с соблюдением строгих стандартов учета. Каждый товар хранится в оригинальной упаковке, аккуратно размещен на промышленном стеллаже для обеспечения быстрой и точной обработки заказов. От чехлов для телефонов до защитных пленок и аксессуаров — все продукты тщательно обрабатываются и содержатся в чистой, просторной среде.

Крупные партии поставок поступают напрямую с завода Spigen и проходят проверку перед размещением на складе. Наша команда ежедневно поддерживает точные уровни запасов, что позволяет эффективно выполнять заказы и уверенно отправлять их по всему миру. Здесь начинается каждый заказ — профессионально хранятся, точно комплектуются и надежно упаковываются перед отправкой клиентам.
| Место выполнения заказа | Приоритет выполнения заказа | Адрес |
|---|---|---|
|
|
Самый высокий приоритет | No. 132 Pengjiang Road, Baiyun District, Guangzhou |
|
|
Низший приоритет | 56 HOI YUEN ROAD, Kwun Tong, Hong Kong |
|
|
Адрес в Северной Америке Более высокий приоритет |
18432 NE SANDY BLVD, PORTLAND, OR, United States |






